Special Stapler, Staples and Bag Sealers

Plier Staplers

• Rugged all-metal heavy-duty construction
• Excellent for many stapling applications including corrugated cardboard, cloth product, product assembly
• 2.5” (6.4 cm) throat depth
• 1/2" (12.5-mm) opening at front reduces to 3/8" (9.5-mm) at rear of throat
• Re-loads in seconds
• Uses ¼”, 3/8” and ½” staples (No. STH5019 series)

Also available as:

• Model ST694SP

       Box Closing Plier Stapler 

       with sword point anvil

Model ST694BS Heavy Duty Bag Sealer Plier Stapler

• Excellent for closing many types of bags
• Rugged all-metal heavy-duty construction
• Excellent for many plastic, fishnet and other bag materials
• Re-loads in seconds
• Uses ¼”, 3/8” and ½” staples (No. STH5019 series)

Model ST694BP Manual Tube Plier Stapler with blunt point anvil

• for stapling plastic caps on cardboard mailing tubes and other applications requiring a snub nose for stapling close to an edge.)
• Uses ¼”, 3/8” and ½” staples (No. STH5019 series)

Model ST779BP Pneumatic Tube End Cap Plier Stapler with blunt point anvil

• heavy duty air plier stapler especially designed to staple plastic end caps to close fiberboard tubes 1” (2.5 cm) diameter or larger.   

• special narrow Blunt Point Snub Nose allows positioning staples so that the staple legs clinch on the inside of the plastic, assuring secure and safe transportation of the fiberboard tube and its contents.

• also fastens two thicknesses of corrugated or four thicknesses of single wall board.

• excellent tool for assembling cartons and containers, pallet lids and bottoms, corrugated trays and wrappings, fiber-drums, fiberboard displays and numerous other applications

• fast and effortless

• loads 168 staples

Model ST779BP Pneumatic Tube End Cap Plier Stapler with blunt point anvil - uses 1/2" crown x Flat .050" Wire staples

No. ST779-3/8 3/8"  Staples  (5,000/box)

No. ST779-1/2 1/2”  Staples (5,000/box)

No. ST779-5/8 5/8"  Staples  (5,000/box)

For heavier wire gauge, order:

Model ST777BP Pneumatic Tube End Cap Plier Stapler with blunt point anvil - uses 1/2" crown x Flat .090" Wire staples  loads 100 staples (all other specs same as ST779BP)

No. ST777-3/8 3/8"  Staples (2,400/box)

No. ST777-1/2 1/2”  Staples (2,400/box)

No. ST777-5/8 5/8"  Staples  (2,400/box)

Staplex® HD-X and HD-XS Manual Carton Tray Stapler

• Ideal for stapling corner flaps of carton trays (tops and bottoms) without pliers!            

• Leveraged handle eliminates fatigued hands

• Mounts to counter top or bench (mounting bolts and wing nuts included; 4 table holes required)

• Uses Staplex Type HO Thick Gauge Staples (5/8" crown x 1/2" leg)

• "Pop-out" front loading

• Heavy duty all metal construction

Model HD-X Table-mounted Heavy Capacity Manual Tray Box Stapler with mounting hardware has 4-1/2" base width at clincher die, 2-3/4" reach

Model HD-XS Narrow Front Table-mounted Heavy Capacity Manual Tray Box Stapler with mounting hardware has 1-1/4" base width at clincher die [recommended for narrow tray flaps] and 2-3/4" reach.                

Weighs 7-lbs. (3.2 kg),

Base Size: 4-1/2" (11.4 cm) wide,

11" (28 cm) long  

Carton Closing Staplers & Staples

Staplex® MCC-150 Manual Carton Top Stapler

• Secures corrugated cartons for safe shipments
• Re-loads 150 staples in seconds
• Uses 1-1/4" x 5/8" leg Staples (Staplex No. C32/15 Staples)
• Adjustable staple clinch depth
• Rugged construction
• High strength, low-mass cast aluminum housing for comfortable all day use.
• Top alignment handle for super-neat staple positioning on all size boxes
• Made in U.S.A.

Weighs only 4.3 lbs. (1.7 kg) Dimensions: 3.75" wide, 19.5" deep and 12" high (9.5 cm x 49.5 cm x 30.5 cm).

Also available: Model MCC-150BOS Manual Carton Stapler (equal to Bostitch D60) for SW7437-5/8 5/8" and SW7437-3/4 3/4" Staples (1-11/32" crown width.)

Staplex® ACC-150 Air Carton Top Stapler

• Secures corrugated cartons for safe shipments
• Virtually effortless pneumatic operation eliminates operator fatigue, promotes neat box closures
• Re-loads 150 staples in seconds
• Uses 1-1/4" x 5/8" leg Staples (Staplex No. C32/15 Staples)
• Adjustable staple clinch depth
• Fast, portable, economical
• Rugged construction
• High strength, low-mass cast aluminum housing for comfortable all day use.
• Requires 80 psi from air compressor
• Made in U.S.A.

Weighs only 5.75 lbs. (2.6 kg). Dimensions: 4.25" wide, 16" deep and 8" high (10.8 cm x 40.6 cm x 20.3 cm).

Also available: Model ACC-150BOS Pneumatic Carton Stapler (equal to Bostitch D16-2AD) for SW7437-5/8 5/8" and SW7437-3/4 3/4" Staples (1-11/32" crown width.)

Pneumatic Hog Ring Bag Sealer & Hermetic Bag Sealer (for  Hermetic Air Tight Bag Sealer see below)

• Poly bags
• Ice bags
• Burlap bags
• Cloth bags
• Net bags
• Produce bags
• Drawstring bags
• Mesh bags

Model SAB-1 Pneumatic Top Bag Sealer With Mounting Stand (requires 80-100 psi compressed air source)

Staplex® Model SAB-30 Pneumatic Top Bag Sealer

• Manufactured entirely from stainless steel, aluminum and plastic.
• Hermetically seal poly bags in seconds.
• Easily loads 150 staples.
• Rounded ends of staples prevent damage to bags or netting.

10” (25.4 cm) maximum height from base (adjustable)

2” (5.1 cm) distance from housing